Product Information
The Arcam PA410 is a flexible power amp with a 4-channel output for home cinema heaven.
Upgrade your Arcam AVR to immersive Dolby Atmos or DTS:X at 7.1.4
This 4-channel power amplifier makes the ideal upgrade for Arcam’s AVR5, AVR10, AVR11, AVR20, AVR21, AVR30, AVR31 AVRs and any future models with pre-outputs. Simply connect via RCA phono leads and upgrade your speaker count for even more immersive sound. Using this 4-channel amp facilitates Dolby 7.1.4, which uses seven surround speakers and four ceiling speakers for a totally enveloping sound. DTS:X and other surround sound formats also benefit from this increased speaker array.
Add two for sensational 9.1.6 surround sound
Taking surround sound to the ultimate level, the AVR20, AVR21, AVR30 and AVR31 let you add two PA410 power amps, for sensational 9.1.6 surround sound. This gives you nine speakers around the room and six in the ceiling – ideal for larger rooms and the most immersive sound around.
Unlock your AV40 or AV41
Arcam’s AV40 and AV41 models are AV processors without built-in amplification. You can pair with a range of PA410 power amps or PA410 power amps combined with other Arcam power amps to give you the precise channel configuration you’re looking for. As well as being highly modular, there’s a sonic advantage in that all the Arcam products have been developed to complement one another, giving you perfect system synergy throughout the amplification.
An impressive stereo amp
The PA410 also makes for a high quality stereo amp. Switch to bridged mode and the power increases to 60 watts per channel (90 watts at 4 ohms) – enough for all but the largest rooms. Simply add your choice of pre-amp or source with a built-in volume control and you’re ready to go.
A sound choice
Built around an efficient Class AB amp design, the PA410 effortlessly delivers the famous Arcam sound quality – smooth, powerful and natural. The toroidal power supply and paralleled transistor output stages ensure there’s plenty of grunt. Meanwhile, the acoustically damped chassis and high quality components help reduce distortion to a minimum.
Perfect for installations
A wide range of sockets make this power amp ideal for professional installations. RS232 control, along with 12V in/out triggers make it easy to integrate with the most sophisticated systems. Firmware updating via USB or Ethernet connections also make it possible for installers to keep the amp at its full potential.
Take your Arcam AV system to the ultimate level, with the PA410 4-channel power amp.
Specifications
Offers
Reviews
Upgrade your Arcam AVR to immersive Dolby Atmos or DTS:X at 7.1.4
This 4-channel power amplifier makes the ideal upgrade for Arcam’s AVR5, AVR10, AVR11, AVR20, AVR21, AVR30, AVR31 AVRs and any future models with pre-outputs. Simply connect via RCA phono leads and upgrade your speaker count for even more immersive sound. Using this 4-channel amp facilitates Dolby 7.1.4, which uses seven surround speakers and four ceiling speakers for a totally enveloping sound. DTS:X and other surround sound formats also benefit from this increased speaker array.
Add two for sensational 9.1.6 surround sound
Taking surround sound to the ultimate level, the AVR20, AVR21, AVR30 and AVR31 let you add two PA410 power amps, for sensational 9.1.6 surround sound. This gives you nine speakers around the room and six in the ceiling – ideal for larger rooms and the most immersive sound around.
Unlock your AV40 or AV41
Arcam’s AV40 and AV41 models are AV processors without built-in amplification. You can pair with a range of PA410 power amps or PA410 power amps combined with other Arcam power amps to give you the precise channel configuration you’re looking for. As well as being highly modular, there’s a sonic advantage in that all the Arcam products have been developed to complement one another, giving you perfect system synergy throughout the amplification.
An impressive stereo amp
The PA410 also makes for a high quality stereo amp. Switch to bridged mode and the power increases to 60 watts per channel (90 watts at 4 ohms) – enough for all but the largest rooms. Simply add your choice of pre-amp or source with a built-in volume control and you’re ready to go.
A sound choice
Built around an efficient Class AB amp design, the PA410 effortlessly delivers the famous Arcam sound quality – smooth, powerful and natural. The toroidal power supply and paralleled transistor output stages ensure there’s plenty of grunt. Meanwhile, the acoustically damped chassis and high quality components help reduce distortion to a minimum.
Perfect for installations
A wide range of sockets make this power amp ideal for professional installations. RS232 control, along with 12V in/out triggers make it easy to integrate with the most sophisticated systems. Firmware updating via USB or Ethernet connections also make it possible for installers to keep the amp at its full potential.
Take your Arcam AV system to the ultimate level, with the PA410 4-channel power amp.
